为 SRCS16/SRCS28X 英特尔® Entry Server Chassis SC5275-E/SC5300 和 英特尔® RAID Controller I2C 和
Documentation
Install & Setup
000007607
01/08/2021
Controller is no longer manufactured or sold. Available support options include: The SATA hot swap backplane kit (Intel® Server Accessory AXX6SATADB) contains two cables that are very similar in construction, but have distinct functions: For more information, see the Drive Cage Upgrade Installation Guide.
Installing I2C and HSBP Cables for Intel® Entry Server Chassis SC5275-E/SC5300 and Intel® RAID Controller SRCS16/SRCS28X
EOIS
Note Intel Customer Service Agents no longer respond to telephone, chat, community support forum, or email inquiries for self-service products.
Note Not all Intel® RAID Controllers SRCS16 utilize this cable. Refer to your RAID card documentation for further details. The installation example shown below is for the Intel® RAID Controller SRCS16. 
Figure 1: Intel® SATA Hot Swap Backplane showing the four-wire IPMB and three-wire I2C headers.
Figure 2: Intel® Server Board showing four-wire HSBP cable connection.
Figure 3: Intel® RAID Controller SRCS16 showing three-wire I2C cable connection to the J6 header.
Note Make sure to connect the black wire to pin 1 of the J6 header leaving pin 4 open.
文档
安装与设置
000007607
2021 年 01 月 08 日
| EOIS | 控制器不再生产或销售。可用的支持选项包括：
|
SATA 热插拔背板套件（英特尔® Server Accessory AXX6SATADB）包含两根结构非常相似，但功能不同的电缆：
- 一根所需的四线 IPMB 或 IPP 电缆。此电缆在背板和服务器主板之间提供 SMBus 连接。它支持与底板管理控制器通信，并便于背板固件更新。
- 可选三线 I2C 电缆。该电缆在背板和背板 SRCS16 之间英特尔® RAID Controller SMBus。它支持 RAID 管理诊断通信。
注意 并非所有所有英特尔® RAID SRCS16 都利用此电缆。有关详细信息，请参阅 RAID 卡文档。下面所示的安装示例适用于 SRCS16 英特尔® RAID Controller。
图 1：英特尔® SATA 热插拔背板，显示四线 IPMB 和三线 I2C 接头。
图 2：英特尔® Server Board显示四线为 4 线、4 线、4 线、4 线、4 线、4 线、4 线、4 线、4 线、4 线、
图 3：英特尔® RAID Controller SRCS16 显示与 J6 接头的三线 I2C 电缆连接。
| 注意 | 确保将黑色电线连接到 J6 接头的针脚 1，使针脚 4 打开。 |
如要了解更多信息，请参阅 驱动器罩升级安装指南。