654879
2008-02-01
Public
该记录无法预览,请从可用选项“下载”或“查看”中选择以访问该材料
说明
本章讨论如何在 Cyclone® II 设备中使用 IEEE 标准 1149.1 BST 电路。
用法说明
相关资产
标题与描述
Format
语言
操作
Cyclone® II Device Handbook, Volume 1, Chapter 3: Configuration and Testing
This document provides information of configuration and testing of Cyclone® II devices.
Cyclone® II Device Handbook, Volume 1, Chapter 5: DC Characteristics and Timing Specifications
This chapter discusses DC Characteristics and Timing Specifications. Unless otherwise noted, the parameter values in this chapter apply to all Cyclone® II devices. AC and DC characteristics are specified using the same numbers for both commercial and indu
Cyclone® II Device Handbook, Volume 1, Chapter 8: Cyclone II Memory Blocks
This document provides information on Cyclone® II M4K ram and interfacing with external memory.
Cyclone® II Device Handbook, Volume 1, Chapter 6: Reference & Ordering Information
This chapter describes the ordering codes for Cyclone® II devices.
Cyclone® II Device Handbook, Volume 1, Chapter 12: Embedded Multipliers in Cyclone II Devices
This chapter provides information on embedded multipliers in Cyclone® II devices.
Cyclone® II Device Handbook, Volume 1, Chapter 9: External Memory Interfaces
This chapter focuses on the implementations of a double data rate I/O interface using the hardware features available in Cyclone® II devices and explains briefly how each memory standars uses the Cyclone II features.
Cyclone® II Device Handbook, Volume 1, Chapter 2: Cyclone II Architecture
This chapter provides information on the Cyclone® II device architecture.
Cyclone® II Device Handbook, Volume 1, Chapter 15: Package Information for Cyclone II Devices
This chapter provides package information for Cyclone® II devices, including: device and package cross reference, thermal resistance values, and package outline.
Cyclone® II Device Handbook, Volume 1, Chapter 10: Selectable I/O Standards in Cyclone II Devices
This chapter is a guide to understanding the input and output capabilities of the Cyclone® II devices.
Cyclone® II Device Handbook, Volume 1, Chapter 1: Introduction
This chapter discusses the Cyclone® II device family features, Cyclone II device package offerings and maximum user I/O pins.
Cyclone® II Device Handbook, Volume 1, Chapter 4: Hot Socketing, ESD & Power-On Reset
This chapter discusses the electro-static dischage (ESD) protection and the power-on reset (POR) circuitry in Cyclone® II devices. The POR circuitry keeps the devices in the reset state until the Vcc is within operating range.
Cyclone® II Device Handbook, Volume 1, Chapter 11: High-Speed Differential Interfaces in Cyclone II Devices
This chapter describes how to use Cyclone® II I/O pins for differential signaling.