ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH 
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH 
WILL BE UNINTERRUPTED OR ERROR-FREE. 

//**************************************************************** 
quartus-10.1-1.03-readme.txt 
Readme file for Quartus II 10.1 SP1 Patch 1.03
Copyright (C) Altera Corporation 2011 All right reserved. 
Patch created on January 28 2011
Patch SPR#: 364805 
SPRs fixed: 364167
//**************************************************************** 

Problem: Quartus II software bug incorrectly allow transceiver clock 
	 distribution network to be dynamically reconfigured by channel 
	 reconfiguration.


Solution: ALTGX_RECONFIG has been updated to protect CRAM setting that
	  is related to clock distribution network from being dynamically
	  reconfigured to fix this issue. After install the patch 0.36,
	  ALTGX_RECONFIG MegaFunction design file is required to be regenerated
	  and perform full compilation on the design. Users may continue to use
	  the HEX / MIF file generated prior to the patch 0.36
	  installation. This problem will be fixed in future Quartus II software
	  version.
   

Caution - You must either have previously installed the 
          Quartus II 10.1 SP1 software or must 
          install the Quartus II 10.1 SP1 software 
          before installing this patch. Otherwise, the patch will 
          not be installed correctly and the Quartus II 
          software will not run properly.